Toyota Tundra II (2007-2018) brake fluid check diagrams & schemes

Years of production: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

Checking brake fluid level

Open the engine compartment in your Toyota Tundra II. The brake fluid level should be between the MAX and MIN lines on the reservoir:

Toyota Tundra Brake fluid check

How to add brake fluid

Make sure to check the fluid type and prepare the necessary items.

  • Brake fluid type: FMVSS No.116 DOT 3 or SAE J1703 brake fluid
  • Required items: rag or paper towel.

The brake fluid builds up the pressure that is responsible for the braking of the car. This is one of the most important operating fluids in a car. The brake fluid presses the brake pads against the brake discs, which causes the vehicle to brake. It is important to control the amount of fluid in the brake system. Checking the brake fluid level regularly can help you determine if there is any leakage. Too little brake fluid in Toyota Tundra will make the brakes inoperative.

Brake fluid can absorb moisture from the air! Excess moisture in the fluid can cause a dangerous loss of braking efficiency. Use only newly opened brake fluid.

All Toyota Tundra II info & diagrams provided on this site are provided for general information purpose only. Actual Toyota Tundra II (2007-2018) diagrams & schemes (fuse box diagrams & layouts, location diagrams, wiring diagrams etc.) may vary depend on the model version.
Comments (0):

No comments yet

Add comment