Toyota Tundra II Cabin air filter replacement

Years of production: 2007 2008 2009 2010 2011 2012 2013 2014 2015 2016 2017 2018

The air conditioning filter (cabin filter) must be cleaned or changed regularly to maintain air conditioning efficiency.

How to replace the cabin air filter?

  1. Turn the engine switch off.
  2. Open the glove box.
  3. Remove the tray.
  4. Remove the cover by sliding.
  5. Remove the filter cover.
  6. Pull the filter out of the filter outlet.
Replace cabin air filter from Toyota Tundra

If the filter is dirty, clean by blowing compressed air through the filter from the downward side. Remove the air conditioning filter and replace it with a new one. Inspect, clean, and replace the air conditioning filter according to the maintenance schedule. In dusty areas or areas with heavy traffic flow, more frequent cleaning or early replacement may be required.

When cleaning the filter, do not clean the filter with water

When using the air conditioning system, make sure that a filter is always installed

The cabin filter is used to clean the air that enters the car through the ventilation system. It is directly responsible for the quality of the air inside the car. The cabin filter in Toyota Tundra should be replaced at least once a year. If you use the car mainly in the city or you are allergic, it is worth changing the cabin air filter twice a year. The life of the filter also depends on the time the car is used. Changing the filter in most cars is simple. It is often located in the glove box on the passenger side.

All Toyota Tundra II info & diagrams provided on this site are provided for general information purpose only. Actual Toyota Tundra II (2007-2018) diagrams & schemes (fuse box diagrams & layouts, location diagrams, wiring diagrams etc.) may vary depend on the model version.
Comments (0):

No comments yet

Add comment