Peugeot Expert III Wiper blade change

Years of production: 2016 2017 2018 2019 2020 2021 2022

Set up maintenance position

This maintenance position is used while cleaning or replacing the wiper blades. It can also be useful, in wintry weather (ice, snow), to release the wiper blades from the windscreen.

Peugeot Expert III windscreen wiper blades maintenance position

  1. Operating the wiper control stalk within one minute after switching off the ignition will place the wiper blades in a vertical position.
  2. Proceed with the desired operation or the replacement of the wiper blades.

Changing a windscreen wiper blade

To change a wiper blade in Peugeot Expert III follow these steps:

  1. Carry out these wiper blade replacement operations from the driver's side.
  2. Starting with the wiper blade farthest from you, hold each arm by the rigid section and raise it as far as possible.
  3. Clean the windscreen using screenwash fluid.
  4. Unclip the worn wiper blade closest to you and remove it.
  5. Install the new wiper blade and clip it to the arm.
  6. Repeat the procedure for the other wiper blade.
  7. Starting with the wiper blade closest to you, once again hold each arm by the rigid section, then guide it carefully onto the windscreen.

Changing a rear wiper blade

  1. Hold the arm by the rigid section and raise it as far as possible.
  2. Clean the rear screen using screenwash fluid.
  3. Unclip the worn wiper blade and remove it.
  4. Install the new wiper blade and clip it to the arm.
  5. Once again hold the arm by the rigid section, then guide it carefully onto the rear screen.


All Peugeot Expert III info & diagrams provided on this site are provided for general information purpose only. Actual Peugeot Expert III (2016-2022) diagrams & schemes (fuse box diagrams & layouts, location diagrams, wiring diagrams etc.) may vary depend on the model version.
Comments (0):

No comments yet

Add comment